你的位置:首页 > 新闻动态

小型旋挖机操作前的准备工作有哪些?

2020-04-25 10:33:16      点击:

操作机器前的准备/Preparation before operation of machine

1 )旋挖机应由经过训练的驾驶人员操纵,并符合各地区对驾驶员的具体要求,才能独立操作。

The rotary excavator should be operated by trained drivers and meet the specific requirements of drivers in each region in order to operate independently.

2)驾驶人员在未熟读使用说明书之前,严禁操纵。

The driver is strictly prohibited from operating before the instruction manual is read.

3)驾驶人员在操作之前必须穿上紧身合适的衣服和适应工作的有关安全防护用品,如安全帽、皮鞋、手套、防护眼镜、安全带等。

Drivers must wear appropriate clothing and safety equipment such as helmets, shoes, gloves, safety glasses, seat belts, etc. before work.

4)每天起动前要按使用要求仔细检查机器。

Check the machine carefully according to the requirements of use before starting every day.

5)检查工作装置、油缸、胶管是否有损坏。

Check the working device, cylinder and hose for damage.

6)清除发动机、散热器、蓄电池周围的灰尘和脏物。

Remove dust and dirt from the engine, radiator, and battery.

7)检查液压装置、油箱、胶管、接头是否漏油(可以通过查看停车地面有无明显油迹的方法)

Check the hydraulic device, fuel tank, hose, and joint for oil leakage (you can check the parking floor for obvious oil traces).

8)检查下部车架各部件(履带、驱动轮、导向轮等)有无损坏,蠼栓有无松动。车架与平台螺栓连接有无松动。

Check the components of the lower frame (tracks, drive wheels, guide wheels, etc.) for damage and looseness of the bolts.The frame is connected to the platform bolts for looseness.

9)检查各仪表、监控仪有无损坏。

Check the instrument and monitor for damage.

10) 清洁后视镜,检查是否损坏,并调整角度以便可以看到正确的視野。

Clean the rear mirror, check for damage, and adjust the angle so that you can see the correct field of view.

11 )检查座椅安全带有无损坏。

Check the seat safety with no damage.

12 )确定已经按照规定的要求进行了正确的保养。

Make sure that proper maintenance has been carried out in accordance with the specified requirements.

警告:操作机器前,应该确保已经明白并熟记本说明书安全规程"中的有关安全操怍机器的内容。

Warning: Before operating the machine, make sure that you understand and memorize the contents of the safety instructions in the Safety Instructions section of this manual.